 |
|
How to use Leased line mode in -48Vdc. |
|
|
Add 10u/50v in wire line. |
|
|
|
|
|
WireSpan 3000/4000/5000B Distance rage. |
|
|
| WireSpan |
3000
(2 Wire ) |
4000
(2 Wire ) |
5000B
(2 Wire ) |
submask |
| Line speed |
| 2048Kbps |
*3.6(2.7)Km |
|
3.2(2.5)Km |
24AWG ( 26AWG ) |
| 1168Kbps |
3.6(2.7)Km |
|
|
* ( 4 Wire ) |
| 256Kbps |
|
|
6.2(4.3)Km |
|
| 128Kbps |
|
(5.5)Km |
|
| | |
|
|
|
|
|
How is the Leased-Line application connected to the Windows 2000 RAS System? |
|
|
For Windows 98/2000, you can just use a cable to connect it. |
|
|
|
|
|
In a Windows 98 environment, how do you dial-in to the Winn 4.0 Server? |
|
|
Install the driver's NULL MODEM. |
|
|
|
|
|
In PLC, how do you configure the settings? |
|
|
LCD model Protocol memu ---> Modem mode ---> Direct mode
For Stand-Alone, use the HyperTerminal / Telix .... set AT command AT&Q0&W.
Before the Modem, you must follow the conditions for N 8 1 DTE speed = DCE speed. |
|
|
|
|
|
How do you allow for Flow-Control? |
|
|
For software: (Xon/ Xoff)
hardware RTS/ CTS - you need to have compatability between the modem and the terminal.
When changing hardware, the effects on the modem are simultaneous. We suggest using hardware flow-control.
If the tests are conducted in synchronized/ asynchronized direct modes, then the modem's flow-control will not work. |
|
|
|
|
|
How do I obtain Atrie's Window NT Driver? |
|
|
You can download ATRIE 1.7 INF from our webpage, or click on the link HERE. |
|
|
|
|
|
ChungHwa Telecom informed me that Atrie modems must be adapted to the Tx level. How do I obtain this setting? |
|
|
LCD model: Modem menu ---> L.L LvL ---> -4 ~ 30dBm
Stand-Alone: Use compatible HyperTerminal / Telix .... set AT comman ATS99=4~30 |
|
|
|
|
|
I need the modem dip-switch menu tree/card. |
|
|
2842 288RE 336RE 9642 288LCD
|
|
|
|
|
|
FOR ATRIE 288 LCD Factory Profile Default Setting. |
|
|
( The EPRROM version must be LA 2.3 or above? ) |
|
|
|
